1/2" Kinetic Recovery Rope "Racer"

[WLL 5/4/3 1,400-2,300 lbs] 

[MBS 7,000 lbs]

Description

The Racer: 1/2 inch Recovery Rope for ATVs, 4-Wheelers, and Small Boats

Recommended for recovery vehicles weighing 700-1,399 pounds.

Breaking Strength: 7,000 lbs.

Buried? This diameter size is our smallest, but it's ready to Yank your toys anytime. Why is this better than traditional flat webbing straps?

Yankum Ropes delivers extra linear force and added kinetic energy that give you the power of momentum. This rope was designed for professionals but made to serve anyone who needs an extra tug. This rope was built to get your ATV out of the mud and back on the trail (Or your buddies ATV that is always getting stuck, Am I right?). It’s built to stretch and perform.

This Mil-Spec quality product is made out of the best Double Braided rope. We use our “Code Red” Polymeric coating to protect against UV, water and abrasion as well as dip the eyes in a thick, protective polymer coating to ensure extended life where it matters most.

Remember to pair the recovery rope with the recovery vehicle, NOT the stuck vehicle. 

• For Use on vehicles that weigh 400 - 1,249 lbs
• Minimum Tensile Strength 7,000 lbs
• WLL 1,400 - 2,000 lbs
• Double Braid Nylon Build
• Polymeric Coating
• Sealed Against Stain and Water
• UV Resistant
• 1 year limited warranty
• Made in USA

Shipping

• Orders ship within 3-5 business days
• Worldwide shipping available
• Expedited shipping services available
• Local pickup available at YR Headquarters, ready in 1 hour during normal business hours

Size Recommendations

• *Soft Shackle Size - 1/4"
• *Hard Shackle Size - 1/2"

Unsure on which size to get? Click here for a recommendation.

FAQ

What size rope do I need?

Ropes are rated based on the weight of the vehicle doing the recovery, not the vehicle that's stuck. Taking your Quad to the rescue? You need this 1/2" rope. 

What length should I get?

The rope length just depends on the user, the terrain, and the vehicles using the ropes. We recommend a 20' if you're going to be in dense woods or rocky areas, where space is limited. And a 30' rope for wide open deserts and dunes.

What is the rope rated for?

The ropes have a 'Minimum Breaking Strength' (MBS). You then use a 'Factor of Safety'(FOS) to determine your 'Working Load Limit' (WLL). Your FOS is typically somewhere between 3 and 5, so either a 3:1, 4:1, or 5:1. You will find your working load limit by dividing the MBS by the FOS. Example:

• • • 7,000 / 3 = 2,333
    • 7,000 / 4 = 1,750
    • 7,000 / 5 = 1,400

What is the proper way to store the rope?

Yankum Ropes are designed to handle a lot of tough situations, and taking good care of your rope when not in use will prolong the life of the rope. It is recommended to store your rope out of the elements and away from harsh chemicals. 

How fast should I go when performing a recovery with a kinetic rope?

Start your recovery with a very slow pull, then move to kinetic pulls. Increase speed gradually until the stuck vehicle is free, but do not exceed 5 mph. If you've reached 5 mph and the stuck vehicle hasn't moved, rethink a different way to recover. Stay safe!